The T142 programmable HART® field temperature transmitter is a two-wire transmitter with analog output. It has measurement input for resistance thermometers (RTDs) in 2-, 3-, or 4-wire connections, thermocouples, and voltage signals. The transmitter is available with or without a digital display. The unit can be programmed with a PC or a HART® protocol handheld terminal. The backlit LC display indicates the current measured value numerically and has a bar graph with limit value violation indicator. The T142 is approved by CSA, ATEX/IECEx for Intrinsically Safe, Non-Incendive and Hazardous Location applications.
The T72 programmable HART® temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTDs) in 2-, 3-, or 4-wire connections, thermocouples, and voltage signals. The transmitter can be programmed with a PC or HART® protocol hand-held terminal. This transmitter is available with or without a digital display, and can be mounted in a direct or remote general-purpose aluminum screw-cover housing. Certain configurations are specified with CSA-rated Intrinsically Safe and Explosion-Proof approvals for Hazardous Locations. There is also an optional Bluetooth® configuration.
The T71 programmable RTD/thermocouple temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTDs) in 2-, 3- or 4-wire connections, thermocouples, and voltage signals. Setting up of the transmitter is done using the communication cable. This transmitter is available with or without a digital display, and can be mounted in a direct or remote general-purpose aluminum screw-cover housing. Certain configurations are specified with CSA-rated Intrinsically Safe and Explosion-Proof approvals for Hazardous Locations. These small units can be mounted in Pyromation DIN (Form B) connection heads or they can be used for surface mounting using a 35 mm DIN rail mounting clip.
The T31 programmable RTD temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for Pt100 resistance thermometers (RTDs) in 2-, 3- or 4-wire connections. Setting up of the transmitter is done using the communication cable. CSA certified for use in specified Hazardous Locations. These small units can be mounted in Pyromation connection heads or they can be used for surface mounting using a 35 mm DIN rail mounting clip.
The T82 programmable HART® field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs: resistance inputs in 2-wire, 3-wire, and 4-wire connections; thermocouples and voltage signals. This transmitter is available with or without a digital display, and can be mounted in a direct or remote general-purpose aluminum screw-cover housing. The T82 can be programmed using a HART® protocol handheld terminal. When supplied with a digital display, the LCD display shows the current measured value. When specified, the T82 transmitter is available with an optional Safety Integrity Level Rating (SIL) for critical applications. Specified configurations have CSA, ATEX and IECEx ratings for Hazardous Location applications.
The Series 662 programmable dual input HART® field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance inputs in 2-wire, 3-wire, and 4-wire connections; thermocouples and voltage signals. The transmitter can be supplied with or without a digital display, in either a general-purpose aluminum housing, or explosion-proof aluminum housing. The Series 662 can be programmed with a PC or a HART® protocol handheld terminal. When supplied with a digital display, the LC screen shows the current measured value and a bar graph with limit value violation indicator.
