COMPANY HEADER
Print Back
Straight-Shank, Gas Sampling Threaded Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature and corrosion-resistance requirements. They are designed with a standard 0.260" or 0.385" bore diameter. As a standard, these Gas Sampling Thermowells are provided with a 45º tip.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Bore Size

 N/A 0.365 in

Dimension "P"

 N/A 3/4 in

Pipe Size "P"

 N/A 3/4 in

Dimension "Q"

 N/A 3/4 in

Well Type

 N/A Straight-shank Threaded - 1/4 in. National Pipe Thread (NPT) - Internal Connection

Note for "S" Length

 N/A Specify length in inches using two digits plus fractional length ("U" ≤1.5 inches)

Note for Material

 N/A Specify two digit material code

Optional "T" Lag Dimension

 N/A Specify "T" dimension in inches

Options

Options

 N/A Brass well cap and chain

Note

Note

 N/A Wells are made from round bar with milled wrench hex. 1-1/4" NPT and 1-1/2" NPT wells are supplied as round bar with milled wrench flats.
("U" length for non-lagging wells) = "S" -1 3/4"
("U" length for lagging wells) = "S" -1-3/4" -"T" (To solve for "T"), "T" = "S" -"U" -1-3/4" (When "U" and "S" are specified)