COMPANY HEADER
Print Back
Heavy-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion-resistance requirements. They are designed with a standard 0.260" or 0.385" bore diameter to accommodate sensing elements with either a 0.252" or 0.377" maximum diameter, respectively. The tapered design is suited for heavy-duty applications where greater rigidity is required for increased pressure and flow due to process conditions. These wells are available as separate components or as part of complete sensor assemblies.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Well Type

 N/A Heavy-Duty Threaded

Bore Diameter

 N/A 0.365 in
Optional T Lag Dimension1 N/A Specify "T" dimension in inches

Note for Material

 N/A Specify two digit material code as stated in the Thermowell Material Table located earlier in section

Note for Length "S"

 N/A Specify length in inches using two digits plus fractional length

Thermowell Dimensions

Pipe Size (P)

 N/A 1 in

Thread Type

 N/A National Pipe Thread (NPT)

Diameter "Q"

 N/A 1-1/16 in

Diameter "V" at 0.260 Inch (in)

 N/A 5/8 in

Diameter "V" at 0.385 Inch (in)

 N/A 49/64 in

Options

Options

 N/A 316 Stainless steel well cap and chain

Well stamped with customer-specified part number

Additional Information

Additional Information

 N/A Wells are made from round bar with milled wrench hex. 1-1/4" NPT and 1-1/2" NPT wells are supplied as round bar with milled wrench flats.

("U" length for non-lagging wells) = "S" -1 1/2"
("U" length for lagging wells) = "S" -1 1/2" -"T"
(To solve for "T"), "T" = "S" -"U" -1 1/2" (When "U" and "S" are specified) Maximum tapered length is 16"
  • 1 Leave blank if no lag is required