COMPANY HEADER
Print Back
The temperature sensors illustrated below are generally used for surface temperature measurement. The series SS and ST spade thermocouples are sandwiched between two thin shims of either stainless steel or two pieces of fiberglass tape. They can be attached using a worm drive hose clamp or by placing under heater bands. These spades can be formed and secured to the outside of various size tubes, pipes, or nozzles. The SK series sensors are sealed in epoxy between two layers of polyimide tape and are provided with an adhesive backing for easy attachment to many surfaces.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Configuration Code

 N/A PL12

Thermocouple Types

 N/A Code JSK (Not available with Fiberglass leadwire.) - Flexible Polyimide spade with adhesive Code JSS - Stainless steel spade Code JST - Flexible fiberglass spade 204ºC [400ºF] max

Note for Other Element Types

 N/A For type E, K, or T thermocouples, replace J in order code with required letter designation.

Resistance Temperature Detectors (RTDs) Element Connection

 N/A Code RBF1852SK - 2 wire Code RBF1853SK - 3 wire

100 Ohms Platinum Resistance Temperature Detector (RTD) Elements (α = 0.003 85 ºC-1)

 N/A Code RBF1852SK - Flexible polyimide spade with adhesive tape backing 204 ºC [400 ºF] Code RBF1853SK - Flexible polyimide spade with adhesive tape backing 204 ºC [400 ºF]

Note for Element

 N/A Nominal spade thickness is 0.060" min to 0.100" max
Extension Leadwire "B"1 N/A Code F1 - Fiberglass insulation - solid conductor Code F1B - Fiberglass insulation - solid conductor - stainless steel overbraid Code F3 - Fiberglass insulation - stranded conductor Code F3B - Fiberglass insulation - stranded conductor - stainless steel overbraid Code K1 - Polyimide insulation - solid conductor Code T1 - Fluoropolymer insulation - solid conductor Code T3 - Fluoropolymer insulation - stranded conductor

Terminations

 N/A Code 0 - Leads not stripped Code 2 - 2 in. split leads, 1/4 in. stripped Code 3 - 2 in. split leads with spade lugs Code 4 - Standard plug Code 5 - Standard jack Code 6 - Miniature plug Code 7 - Miniature jack Code 8 - 2 in. split leads with 1/4 in. female disconnects

Options

Options

 N/A BX - Box connector CC - Cable clamp MC - Mating connector

Additional Information

Additional Information

 N/A The SK series sensors are available in various thermocouple types or RTDs. The RTDs are constructed using a 100 Ω platinum element with a temperature coefficient of 0.003 85 ºC-1 (IEC Class B).
  • 1 Insert 3 digit "B" length in inches. EX: F3B024=24" "B" length.