COMPANY HEADER
Print Back
Angle thermocouple assemblies are most commonly used in general process applications requiring the use of "over-the-side" temperature sensors with metal-alloy protection tubes. Special construction designs are available. Assemblies may be shipped with the hot leg unattached for assembly at time of installation due to size limitations. Cold leg as standard is supplied as carbon steel.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Shank Type

 N/A Tubes

Configuration Code

 N/A ID07
Thermocouple Type and Wire Gauge Size1 N/A J14A J8A K11A K14A K8A N14A N8A

Hot Leg Protection Tube Material

 N/A Code 3 - Alloy 600 Code 5 - 446 Stainless Steel Code 6 - Carbon Steel Code 7 - Alloy 601 Code 8 - 316 Stainless Steel

Hot Leg National Pipe Thread (NPT) Thread Pipe Size for 1/2 Inch

N/A Code 316 Stainless Steel - 50 inCode 316 Stainless Steel - 75 inCode 446 Stainless Steel - 50 inCode 446 Stainless Steel - 75 inCode Alloy 600 - 50 inCode Alloy 600 - 75 inCode Alloy 601 - 50 inCode Alloy 601 - 75 inCode Carbon Steel - 50 inCode Carbon Steel - 75 in

Hot Leg National Pipe Thread (NPT) Thread Pipe Size for 3/4 Inch

N/A Code 316 Stainless Steel - 75 inCode 446 Stainless Steel - 75 inCode Alloy 600 - 75 inCode Alloy 601 - 75 inCode Carbon Steel - 75 in

Hot Leg National Pipe Thread (NPT) Thread Pipe Size for 1 Inch

N/A Code 100 - 316 Stainless Steel inCode 100 - 446 Stainless Steel inCode 100 - Alloy 601 inCode 100 - Carbon Steel inCode N/A - Alloy 600 in

Hot Leg Length

N/A 12 in18 in24 in30 in36 in

Cold Leg Length

N/A 12 in18 in24 in30 in36 in

Continuous Bend Radius

 N/A 1" National Pipe Thread (NPT) = 5(7/8)" 1/2" National Pipe Thread (NPT) = 4(5/8)" 3/4" National Pipe Thread (NPT) = 4(5/8)"
Optional Welded Bushings Material2 N/A Code 6D(U) - Steel Code 6E(U) - Steel Code 6F(U) - Steel Code 6G(U) - Steel Code 8D(U) - 316 Stainless Steel Code 8E(U) - 316 Stainless Steel Code 8F(U) - 316 Stainless Steel Code 8G(U) - 316 Stainless Steel

Bushing Size

 N/A Code 6D(U) - 3/4 NPT Bushing (50 tubes only) Code 6E(U) - 1 NPT Bushing (50 and 75 tubes Code 6F(U) - 1 -1/4 NPT Bushing Code 6G(U) - 1-1/2 NPT Bushing Code 8D(U) - 3/4 NPT Bushing (50 tubes only) Code 8E(U) - 1 NPT Bushing (50 and 75 tubes Code 8F(U) - 1-1/4 NPT Bushing Code 8G(U) - 1-1/2 NPT Bushing

Head Terminations

 N/A Code 31 - Aluminum Screw-Cover Head Code 34 - Cast-Iron screw-cover head Code 49 - Flip-Top Aluminum Head

Assembly Options

 N/A Code CB (Requires 12" minimum on Hot Leg and Cold Leg) - Continuous bend-angle assembly Code GS - Ground screw Code H - Adjustable steel mounting flange Code HC - Adjustable steel flange (cold leg) Code I - Insulated hot junction Code L - Stainless tag Code SB - 1/2" NPT conduit reducer bushing Code UL - Steel union elbow

Element

 N/A Code 11- Duplex Code 11- Single Code 14 - Duplex Code 14 - Single Code 8 - Duplex Code 8 - Single

Hot Leg Tube Availability

 N/A 100 50 75

Cold Leg Supplied

 N/A 3/4" NPT on HL tube codes 50, 75. 1" NPT on HL tube codes 100. 1" NPT on duplex 8 and 11 gauge assemblies.
  • 1 For duplex assemblies use the T/C type code letter twice. Example: J8A - 7 - 75 becomes JJ8A - 7 - 75
  • 2 Substitute insertion length, in inches, measured from hot tip to bottom of bushing for (U) above.

    Insert NW in place of insertion length (U) for bushing supplied loose on tube.