The below illustrated thermocouples are most commonly used in the mixing of rubber compounds and other abrasive substances. All standard thermocouples are individually tested to meet or surpass the Industry Time Response Test Standard. Thermocouple sensors are supplied with grounded hot junctions as standard. Thermocouples may be ordered with a choice of either a hard-chrome plated tip, or with a XH-5 coated tip that provides greater abrasion and wear resistance.
| Items |
 J050G-CM-10-31 13 Inch (in) Dimension "X" Rubber Compound Mixer Temperature Sensor |
J050G-CM-10-49 13 Inch (in) Dimension "X" Rubber Compound Mixer Temperature Sensor |
J050G-CM-10-K1 13 Inch (in) Dimension "X" Rubber Compound Mixer Temperature Sensor |
J050G-CM-20-31 18 Inch (in) Dimension "X" Rubber Compound Mixer Temperature Sensor |
J050G-CM-20-49 18 Inch (in) Dimension "X" Rubber Compound Mixer Temperature Sensor |
|||||
| Description | The below illustrated thermocouples are most commonly used in the mixing of rubber compounds and other abrasive substances. All standard thermocouples are individually tested to meet or surpass the Industry Time Response Test Standard. Thermocouple sensors are supplied with grounded hot junctions as standard. Thermocouples may be ordered with a choice of either a hard-chrome plated tip, or with a XH-5 coated tip that provides greater abrasion and wear resistance. | |||||||||
| Brands | Pyromation® | |||||||||
| Configuration Code | SP05 | |||||||||
| Measuring Element Type | Single | |||||||||
| Measuring Element Thermocouple Type | J | |||||||||
| Note for Measuring Element | To order type K thermocouple replace 'J' in the above order code with desired (K). | |||||||||
| Mounting Tip Code | 10 | 10 | 10 | 20 | 20 | |||||
| Mounting Tip Material | Hard Chrome-Plated | |||||||||
| Mounting Notch Configuration | 3 Notch (Square) | 3 Notch (Square) | 3 Notch (Square) | 2 Notch (Triangular) | 2 Notch (Triangular) | |||||
| Note for Mounting | Applications are typical, but may vary by machine. | |||||||||
| Typical Application by Mixer Models | 11D 3D 9D F80 | 11D 3D 9D F80 | 11D 3D 9D F80 | F270 F620 | F270 F620 | |||||
| Termination Element Options Type | Aluminum Screw-cover Head | Aluminum Flip-top Head | Polyimide - Solid Conductor | Aluminum Screw-cover Head | Aluminum Flip-top Head | |||||
| Dimension A | 9-1/16 in | 9-1/16 in | 9-1/16 in | 13-31/32 in | 13-31/32 in | |||||
| Dimension B | 9-13/16 in | 9-13/16 in | 9-13/16 in | 15-31/32 in | 15-31/32 in | |||||
| Dimension C | 10-5/16 in | 10-5/16 in | 10-5/16 in | |||||||
| Dimension X | 13 in | 13 in | 13 in | 18 in | 18 in | |||||
| Dimension E | ||||||||||
| Note for Dimension | All notches are 5/16" wide (nominal) | |||||||||
| Tip Outer Diameter (OD) (Dimension D) | 0.625 in | |||||||||
| Tip Length | 1/2 in | |||||||||
| Note | All mill slots are 5/16 in. wide. Abrasion-resistant tips are 0.625 in. O.D. x 1/2 in. long. | |||||||||
|
|
||||||||||
