The sensing elements listed on this page can be cut to any desired length over 3" long by using an ordinary tubing cutter. All sheaths are provided in 316 stainless steel.
| Items |
 RBF185L483-012-VCL-T3J-2 SP08 1/4 Inch (in) Sheath Diameter Variable-Length Resistance Temperature Detector (RTD) Element |
RBF185L483-012-VCL-T3-2 SP08 1/4 Inch (in) Sheath Diameter Variable-Length Resistance Temperature Detector (RTD) Element |
R1T185L483-012-VCL-T3J-2 SP08 3/8 Inch (in) Sheath Diameter Variable-Length Resistance Temperature Detector (RTD) Element |
R1T185L483-012-VCL-T3-2 SP08 3/8 Inch (in) Sheath Diameter Variable-Length Resistance Temperature Detector (RTD) Element |
RBF185L683-012-VCL-T3J-2 SP08 1/4 Inch (in) Sheath Diameter Variable-Length Resistance Temperature Detector (RTD) Element |
|||||
| Description | The sensing elements listed on this page can be cut to any desired length over 3" long by using an ordinary tubing cutter. All sheaths are provided in 316 stainless steel. | |||||||||
| Brands | Pyromation® | |||||||||
| Configuration Code | SP08 | |||||||||
| Resistance Temperature Detector (RTD) Type | Single | Single | Single | Single | Duplex | |||||
| Tolerance | Class B | Class B | Grade B | Grade B | Class B | |||||
| Note for Tolerance | Refer to RTD tolerance information in the General Information section for calculations to determine specific tolerance at temperature | |||||||||
| Sheath Diameter | 1/4 in | 1/4 in | 3/8 in | 3/8 in | 1/4 in | |||||
| Resistance Temperature Detector (RTD) Extension Leadwire | Fluoropolymer Insulation Individual Leads Stranded Conductor (12" Limit) | Fluoropolymer Insulation - Stranded Conductor | Fluoropolymer Insulation Individual Leads Stranded Conductor (12" Limit) | Fluoropolymer Insulation - Stranded Conductor | Fluoropolymer Insulation Individual Leads Stranded Conductor (12" Limit) | |||||
| Temperature Rating | 204 ºC400 ºF | |||||||||
| Note for Resistance Temperature Detector (RTD) Extension Leadwire |
Leads supplied stripped and tinned 1/2 in. Insert wire code number and 3 digit "E" length code in inches |
|||||||||
| Note for Sheath Length | Specify "X" Length in Inches Using (3) Digits | |||||||||
| Note | Consult factory for other RTD elements | |||||||||
|
|
||||||||||
