COMPANY HEADER
Request Information
Standard Flanged, Gas Sampling Thermowells are available in a variety of materials, flange types, flange sizes, and pressure ratings. They are also available in various lengths and with optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature and corrosion-resistance requirements. Standard flanged thermowells are supplied with a straight shank and are designed with a 0.260" or 0.385" bore diameter. As a standard, these Gas Sampling Thermowells are provided with a 45º tip
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Well Type

 N/A Code PSF - Standard flanged - 1/2 in . National Pipe Thread (NPT) - internal connection Code PSFB - Standard flanged - 1/4" in. National Pipe Thread (NPT) - internal connection

Bore Diameter

 N/A Code 4 - 0.260 in. Code 6 - 0.385 in.

Flange Size

 N/A Code 10 - 1 in. (DN 25) Code 13 - 1-1/4 in. (DN 32) Code 15 - 1-1/2 in. (DN 40) Code 20 - 2 in. (DN 50) Code 30 - 3 in. (DN 80)

Flange Type

 N/A Code F - Flat face Code J - Ring joint Code R - Raised face

Pressure Rating

 N/A Code 1 - 150 Class Code 15 - 1500 Class Code 3 - 300 Class Code 6 - 600 Class Code 9 - 900 Class

Note for "S" Length

 N/A Specify length in inches using two digits plus fractional length ("U" ≤ 1.5 inches)

Note for Material

 N/A Specify two digit material code

Note for Optional "T" Lag Dimension

 N/A Specify "T" dimension in inches using two digits plus any fractional length

Options

Options

 N/A C8 - 316 Stainless steel well cap and chain Code C22 - Brass well cap and chain Code F - Full penetration weld Code S - Well stamped with customer-specified part number