COMPANY HEADER
Request Information
The RTDs described below are those most commonly used in the plastic process industry. These assemblies can be used in many general applications where a 1/8" NPT fitting is preferred by utilizing either a compression fitting or a bayonet adapter. These assemblies are supplied standard using 316 stainless steel sheath material and a 100 Ω platinum element with a temperature coefficient of 0.003 85 ºC-1 (IEC Class B). Elements of other materials, values, and tolerances are available upon request.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Configuration Code

 N/A PL02

Resistance Temperature Detectors (RTDs) Element Connection

 N/A Code RBF1852P (Single) - 2-wire Code RBF1853P (Single) - 3-wire Code RBF2852P (Duplex) - 2-wire (Duplex: no 1/8" O.D.; 3/16" O.D. limited to polyimide or fluoropolymer leadwire.) Code RBF2853P (Duplex) - 3-wire (Duplex: no 1/8" O.D.; 3/16" O.D. limited to polyimide or fluoropolymer leadwire.)

Sheath Diameter

 N/A Code 2 - (Only available with polyimide or fluoropolymer leads.) - 1/8 inCode 3 - 3/16 inCode 4 - 1/4 in

Bend Angle

 N/A Code 1 - Straight Code 2 - 45 Degree bend Code 3 - 90 Degree bend

"A" Dimension

 N/A Insert 2 digit "A" length in inches (1" min). EX: 06 = 6 inch "A" dimension.

Sheath Fittings

 N/A Code 00 - No fitting inCode 01A - 1/8" National Pipe thread (NPT) Stainless Steel one time adjustable comp. fitting inCode 13A - 7/16" Inner Diameter (ID) single slot spring loaded bayonet fitting (13A are not available with 1/4" O.D. sheaths) inCode 15A - 1/8" National Pipe Thread (NPT) brass one time adjustable comp. fitting. inCode 16A - Comp. fitting with bayonet cap and spring - 1/8" O.D. sheaths only (2 5/8" min. 'A' dimension) in
Extension Leadwire Type and "B" and "C" Dimension1 N/A Code 000 - No leadwire, connector attached to sheath Code F3 - Fiberglass insulation - stranded conductor Code F3A - Fiberglass insulation - stranded conductor - flexible armor Code F3B - Fiberglass insulation - stranded conductor - stainless steel overbraid Code F3J - Fiberglass insulation - individual leads - stranded conductor (12" limit) Code K3 - Polyimide insulation - stranded conductor Code K3A - Polyimide insulation - stranded conductor - flexible armor Code K3B - Polyimide insulation - stranded conductor - stainless overbraid Code T3 - Fluoropolymer insulation - stranded conductor Code T3A - Fluoropolymer insulation - stranded conductor - flexible armor

Termination

 N/A Code 0 - Leads not stripped Code 2 - 2" Split leads, 1/4" stripped Code 3 - 2" Split leads with spade lugs Code 4 - Standard Plug Code 5 - Standard Jack Code 6 - Miniature Plug Code 7 - Miniature Jack Code 8 - 2" split leads with 1/4" female disconnect lugs

Options

Options

 N/A BX - Box connector CC - Cable clamp MC - Mating connector
  • 1 Insert 3 digit "B" length in inches. EX: F1036=36" "B" length; for assemblies requiring other than the standard 6" "C" dimension, insert 3 digit "C" length in inches after "B" dimension. EX: F1A036-012=36" B length with additional 12" leads beyond armor.