COMPANY HEADER
Request Information
The RTD elements illustrated and described on this page are designed to measure temperature in a variety of process and laboratory applications. These RTDs are specifically designed for use in two different process temperature ranges and will provide accurate and repeatable temperature measurement through a broad range. Low range RTDs are constructed using fluoropolymer-insulated, silver-plated copper internal leads with potting compounds to resist moisture penetration. High range RTDs are constructed with nickel internal leads inside swaged MgO insulated cable to allow higher temperature measurements at the RTD element and provide higher temperature lead protection along the sheath. The following tables allow customer selection of standard element materials, tolerances, sheath diameters, mounting fittings and terminations. Custom-built assemblies with non-standard specifications are available upon request.
Unit of Measure

Specifications

Brands

 N/A Pyromation®

Configuration Code

 N/A RT01
Tolerance1 N/A Code R1T185H - Grade B Code R1T185L - Grade B Code R1T192H - Grade B Code R1T192L - Grade B Code R3T185L - Class AA Code R3T192L - Class AA Code R5T185L - 1/5 Class B Code RAF185L - Class A Code RAT185H - Class A Code RBF185L - Class B Code RBF195L - Class B

Temperature Range

 N/A Code R1T185H : -200 to 600 ºCCode R1T185L : -200 to 200 ºCCode R1T192H : -200 to 600 ºCCode R1T192L : -200 to 200 ºCCode R3T185L : -50 to 200 ºCCode R3T192L : -50 to 200 ºCCode R5T185L : -30 to 150 ºCCode RAF185L : -30 to 200 ºCCode RAT185H : -100 to 450 ºCCode RBF185L : -50 to 200 ºCCode RBF195L : -50 to 200 ºC

Base Resistance at 0 ºC (R0)

 N/A Code R1T185H - 100 OCode R1T185L - 100 OCode R1T192H - 100 OCode R1T192L - 100 OCode R3T185L - 100 OCode R3T192L - 100 OCode R5T185L - 100 OCode RAF185L - 100 OCode RAT185H - 100 OCode RBF185L - 100 OCode RBF195L - 1000 O

Temperature Coefficient

 N/A Code R1T185H - α = 0.003 85 ºC-1Code R1T185L - α = 0.003 85 ºC-1Code R1T192H - α = 0.003 92 ºC-1Code R1T192L - α = 0.003 92 ºC-1Code R3T185L - α = 0.003 85 ºC-1Code R3T192L - α = 0.003 92 ºC-1Code R5T185L - α = 0.003 85 ºC-1Code RAF185L - α = 0.003 85 ºC-1Code RAT185H - α = 0.003 85 ºC-1Code RBF185L - α = 0.003 85 ºC-1Code RBF195L - α = 0.003 85 ºC-1

Available Sheath Outer Diameter (O.D) (Code - 28 )

 N/A 1/8 in

Available Sheath Outer Diameter (O.D) (Code - 38 )

 N/A 3/16 in

Available Sheath Outer Diameter (O.D) (Code - 48)

 N/A 1/4 in

Available Sheath Outer Diameter (O.D) (Code - 68 )

 N/A 3/8 in

Length

 N/A Code - 3 Digit 'X' Length

Element Connection

 N/A Code 2 - 2-wire Code 3 - 3-wire Code 4 - 4-wire (Not available in duplex)

Nominal Sheath Diameter

 N/A Code 48R28 - 1/4 inCode 68R38 - 3/8 inCode 88R48 - 1/2 in

Tip Outer Diameter (O.D)

 N/A Code 48R28 - 1/8 inCode 68R38 - 3/16 inCode 88R48 - 1/4 in

Tip Length

 N/A Code 48R28 - 1 1/4 inCode 68R38 - 1 1/4 inCode 88R48 - 1 1/4 in
  • 1 Refer to RTD tolerance information in the general information section for calculations to determine specific tolerance at temperature.