Pyromation - Standard-Duty Threaded Thermowells

Standard-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion-resistance requirements. The stepped construction is used in standard-duty applications and increases the speed of response while maintaining mechanical strength. These thermowells are designed with standard 0.260" bore diameters to accommodate sensing elements with a 0.252" maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.

Unit of Measure

Items	S4C0608T2C8S 0.260 Inch (in) Bore Diameter and 1/2 Inch (in) Pipe Size (P) Standard-Duty Threaded Thermowell	S4C0608T2C22S 0.260 Inch (in) Bore Diameter and 1/2 Inch (in) Pipe Size (P) Standard-Duty Threaded Thermowell	S4D0608T2C8S 0.260 Inch (in) Bore Diameter and 3/4 Inch (in) Pipe Size (P) Standard-Duty Threaded Thermowell	S4D0608T2C22S 0.260 Inch (in) Bore Diameter and 3/4 Inch (in) Pipe Size (P) Standard-Duty Threaded Thermowell	S4E0608T2C8S 0.260 Inch (in) Bore Diameter and 1 Inch (in) Pipe Size (P) Standard-Duty Threaded Thermowell
Description	N/A Standard-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths, and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion-resistance requirements. The stepped construction is used in standard-duty applications and increases the speed of response while maintaining mechanical strength. These thermowells are designed with standard 0.260" bore diameters to accommodate sensing elements with a 0.252" maximum diameter. These wells are available as separate components or as part of complete sensor assemblies.
Brands	N/A Pyromation®
Pipe Size (P)	N/A 1/2 in	N/A 1/2 in	N/A 3/4 in	N/A 3/4 in	N/A 1 in
Thread Type	N/A National Pipe Thread (NPT)
Diameter "Q"	N/A 5/8 in	N/A 5/8 in	N/A 3/4 in	N/A 3/4 in	N/A 7/8 in
Diameter "V"	N/A 1/2 in
Well Type	N/A Standard-duty Threaded
Bore Diameter	N/A 0.260 in
Note for Length "S"	N/A Specify length in inches using two digits plus fractional length
Note for Material	N/A Specify two digit material code as stated in the Thermowell Material Table located earlier in section
Optional T Lag Dimension¹	N/A Specify "T" dimension in inches
Options	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number	N/A Brass well cap and chain Well stamped with customer-specified part number	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number	N/A Brass well cap and chain Well stamped with customer-specified part number	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number
Additional Information	N/A Wells are made from round bar with milled wrench hex. 1-1/4 in. National Pipe Thread (NPT) and 1-1/2 in. National Pipe Thread (NPT) wells are supplied as round bar with milled wrench flats. ("U" length for non-lagging wells) = "S" - 1-1/2 in. ("U" length for lagging wells) = "S" - 1-1/2 in. -"T" (To solve for "T"), "T" = "S" -"U" -1-1/2 in.(When "U" and "S" are specified)
¹ Leave blank if no lag is required