Pyromation - Heavy-Duty Threaded Thermowells

Heavy-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion-resistance requirements. They are designed with a standard 0.260" or 0.385" bore diameter to accommodate sensing elements with either a 0.252" or 0.377" maximum diameter, respectively. The tapered design is suited for heavy-duty applications where greater rigidity is required for increased pressure and flow due to process conditions. These wells are available as separate components or as part of complete sensor assemblies.

Unit of Measure

Items	H4C0608T2C8S 0.260 Inch (in) Bore Diameter and 1/2 Inch (in) Pipe Size (P) Heavy-Duty Threaded Thermowell	H4C0608T2C22S 0.260 Inch (in) Bore Diameter and 1/2 Inch (in) Pipe Size (P) Heavy-Duty Threaded Thermowell	H4D0608T2C8S 0.260 Inch (in) Bore Diameter and 3/4 Inch (in) Pipe Size (P) Heavy-Duty Threaded Thermowell	H4D0608T2C22S 0.260 Inch (in) Bore Diameter and 3/4 Inch (in) Pipe Size (P) Heavy-Duty Threaded Thermowell	H4E0608T2C8S 0.260 Inch (in) Bore Diameter and 1 Inch (in) Pipe Size (P) Heavy-Duty Threaded Thermowell
Description	N/A Heavy-Duty, Threaded Thermowells are available in a variety of materials, process connection sizes, lengths and optional lagging extensions. Thermowell specifications should be determined based on process conditions which include strength, temperature, pressure and corrosion-resistance requirements. They are designed with a standard 0.260" or 0.385" bore diameter to accommodate sensing elements with either a 0.252" or 0.377" maximum diameter, respectively. The tapered design is suited for heavy-duty applications where greater rigidity is required for increased pressure and flow due to process conditions. These wells are available as separate components or as part of complete sensor assemblies.
Brands	N/A Pyromation®
Well Type	N/A Heavy-Duty Threaded
Bore Diameter	N/A 0.260 in
Pipe Size (P)	N/A 1/2 in	N/A 1/2 in	N/A 3/4 in	N/A 3/4 in	N/A 1 in
Thread Type	N/A National Pipe Thread (NPT)
Diameter "Q"	N/A 11/16 in	N/A 11/16 in	N/A 7/8 in	N/A 7/8 in	N/A 1-1/16 in
Diameter "V" at 0.260 Inch (in)	N/A 5/8 in
Diameter "V" at 0.385 Inch (in)	N/A	N/A 49/64 in	N/A 49/64 in	N/A 49/64 in	N/A 49/64 in
Options	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number	N/A Brass well cap and chain Well stamped with customer-specified part number	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number	N/A Brass well cap and chain Well stamped with customer-specified part number	N/A 316 Stainless steel well cap and chain Well stamped with customer-specified part number
Optional T Lag Dimension¹	N/A Specify "T" dimension in inches
Note for Material	N/A Specify two digit material code as stated in the Thermowell Material Table located earlier in section
Note for Length "S"	N/A Specify length in inches using two digits plus fractional length
Additional Information	N/A Wells are made from round bar with milled wrench hex. 1-1/4" NPT and 1-1/2" NPT wells are supplied as round bar with milled wrench flats. ("U" length for non-lagging wells) = "S" -1 1/2" ("U" length for lagging wells) = "S" -1 1/2" -"T" (To solve for "T"), "T" = "S" -"U" -1 1/2" (When "U" and "S" are specified) Maximum tapered length is 16"
¹ Leave blank if no lag is required